Filtre à modèle:
Dernièrement consulté
Helicoil Thread cutter M12x1
Non.: 200108048
Helicoil Thread cutter M12x1
Non.: 200108048
Disponibilité:
1-2 Wochen
16,30 €
*
Unité: Stk.
Saisissez votre adresse électronique et nous vous informerons lorsque cet article sera à nouveau disponible.
Short machine tap to create a holding thread (acc. to DIN 8140-2) for HELICOIL® coil thread inserts.
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 12
DHC min. 13,3
Diameter (d) M 12x1
Diameter (d2) 11
L1 70
L2 22
L3 12
Pitch (P) 1
Product type 0140.0
Thread type Metric standard and fine thread
Version C
Properties:
• For through holes
• For blind holes (only if sufficient chip space is provided)
• Machining of materials with 700 N/mm² strength max.
• Tolerance class 6H mod. corresponds with 5H
Note:
Only suited for blind holes if sufficient chip space is provided. Minimum requirement: 1 d deeper than the full thread length.
The short machine tap can also be used as a machine tap.
d3 12
DHC min. 13,3
Diameter (d) M 12x1
Diameter (d2) 11
L1 70
L2 22
L3 12
Pitch (P) 1
Product type 0140.0
Thread type Metric standard and fine thread
Version C
- ALLE Alle Motorräder (0 ccm)
*
Tous les prix incluse TVA et hors Frais de port.
